A MOTS-c dosage chart can only do one honest job: convert units. It can show that 1 mg equals 1,000 mcg, how the amount of bac water added to a vial sets its concentration, and how many units on a U-100 syringe hold a given volume. It cannot tell you what dose to take, because no evidence-based human MOTS-c dose exists.
Most people searching for a MOTS-c dosage chart are really trying to solve a maths problem, usually because they bought an unregulated research vial. They have a number in milligrams, a syringe marked in units, and a powder vial that needs mixing, and the three do not obviously connect.
This guide explains how they connect. Every worked number below is an illustration only, chosen to make the arithmetic easy. None of it is a dosing recommendation. Your dose, if a provider prescribes MOTS-c, comes from that provider, and the pharmacy prepares it for you. Also searched as: mots-c peptide dosage chart, motsc dosage chart, mots c dosage chart, peptide mots-c chart and mots-c peptide calculator.
telos rx patients never need this maths. If a provider prescribes MOTS-c through telos rx, it is compounded by a licensed US pharmacy and arrives ready to inject, already prepared at the dose your provider prescribed. There is nothing to mix and no dose to calculate; the label and your care team explain how to use and store it. The conversions below explain what people buying unregulated research vials have to work out, and why that is so easy to get wrong.
What a MOTS-c dosage chart should and should not show
Search results for a MOTS-c peptide dosage chart usually mix two very different things in one table: unit conversions, which are pure arithmetic, and dose suggestions, which need clinical evidence. The arithmetic is reliable. The suggestions are not, because there are no controlled human trials of injected MOTS-c to base them on.
We explain why there is no standard dose in our companion guide on MOTS-c dosage and how providers decide. In short, the published research doses come from mice, measured per kilogram of body weight, and they do not translate into a human chart. This article stays on the maths. If you are considering a prescription, the telos rx MOTS-c protocol starts with a provider review, not a chart.
A chart can convert units. Only a clinician can set a dose. At telos rx, a licensed provider reviews your online intake asynchronously and, if MOTS-c is appropriate, sets the dose and schedule for you.
See if MOTS-c is right for youStep one: mg to mcg
Peptide amounts are written in two units that are easy to confuse:
- mg is a milligram, one thousandth of a gram.
- mcg is a microgram, one thousandth of a milligram. You will also see it written as µg.
So converting mg to mcg means multiplying by 1,000, and going the other way means dividing by 1,000.
| Milligrams (mg) | Micrograms (mcg) |
|---|---|
| 0.1 mg | 100 mcg |
| 0.5 mg | 500 mcg |
| 1 mg | 1,000 mcg |
| 5 mg | 5,000 mcg |
| 10 mg | 10,000 mcg |
Illustration only, not a dosing recommendation.
This is where many online MOTS-c dosage chart errors start. A figure copied in mcg and read as mg is a thousandfold mistake. Always check the unit before you check the number.
Step two: how bac water sets concentration
Grey-market research peptides usually arrive as a freeze-dried powder that the buyer has to dissolve before use (telos rx MOTS-c does not; it arrives ready to inject). The liquid most often used is bacteriostatic water, usually shortened to bac water: sterile water with a small amount of benzyl alcohol to slow bacterial growth once the vial has been opened.
The key idea is simple. The powder in the vial is a fixed amount. The water the buyer adds decides how concentrated the result is:
Concentration = amount of peptide in the vial ÷ volume of liquid added
Here is the same hypothetical 10 mg vial mixed with different volumes of bac water:
| Hypothetical vial | Bac water added | Concentration | Same thing in mcg |
|---|---|---|---|
| 10 mg | 1 mL | 10 mg per mL | 10,000 mcg per mL |
| 10 mg | 2 mL | 5 mg per mL | 5,000 mcg per mL |
| 10 mg | 5 mL | 2 mg per mL | 2,000 mcg per mL |
Illustration only, not a dosing recommendation. The 10 mg vial is illustrative and is not a statement about any product's strength.
More water means a weaker solution, so the same amount of peptide takes up more volume. That is why two people with "the same vial" can read completely different numbers off their syringes. Our guide on how to reconstitute peptides step by step explains what research-vial buyers go through, and why a prescription removes those steps.
Step three: U-100 syringe units in a MOTS-c dosage chart
Many peptide syringes are insulin-style U-100 syringes. The "units" printed on them are a volume scale, not a measure of how much peptide is inside:
- 100 units = 1 mL
- 10 units = 0.1 mL
- 1 unit = 0.01 mL
So a unit only tells you an amount of peptide once you know the concentration. Combine step two and step three:
Peptide in the syringe = concentration (mcg per mL) × volume drawn (mL)
| Units on a U-100 syringe | Volume | At 2,000 mcg per mL | At 5,000 mcg per mL |
|---|---|---|---|
| 10 units | 0.1 mL | 200 mcg | 500 mcg |
| 20 units | 0.2 mL | 400 mcg | 1,000 mcg |
| 50 units | 0.5 mL | 1,000 mcg | 2,500 mcg |
Illustration only, not a dosing recommendation.
Look at the first row. The same 10 units hold 200 mcg in one vial and 500 mcg in another. A MOTS-c dosage chart written in units, without stating the concentration it assumes, is close to meaningless.
Prefer a dose set by a clinician and a label from a licensed US pharmacy? Compounded MOTS-c at telos rx is subject to medical approval by a licensed provider, who sets the dose and schedule, and it arrives ready to inject at that dose, with no mixing and no maths.
Learn about the MOTS-c protocolWhat a peptide calculator actually does
A peptide calculator is a small tool that runs the three steps above for you. You enter the vial amount, the volume of bac water, and a target amount, and it returns a volume or a number of syringe units.
That is useful arithmetic. But a peptide calculator has two blind spots:
- It trusts your inputs. If the vial does not contain what its label claims, the answer is wrong. With grey-market vials sold as "research use only", identity and strength are unverified, which is why a certificate of analysis matters.
- It cannot choose the target. The "target amount" box is where a dose goes. A calculator has no idea whether any amount is right for you. That decision belongs to a provider.
Put simply, a calculator answers "how much liquid?". It never answers "how much MOTS-c?".
Why online MOTS-c dosage charts mislead
Most MOTS-c peptide dosage chart images share the same weaknesses:
- They present a dose range as if it were established, when no human trial has set one.
- They assume a vial strength and water volume without saying so.
- They switch between mg, mcg and units without flagging it.
- They often trace back to animal research figures, which were measured per kilogram of mouse body weight and given by a route not used in people.
That is the one-paragraph version of the "why there is no dose" story. If you want the research detail, the companion article on how providers set MOTS-c dosage covers it, and our guide to MOTS-c dosage per day and frequency looks at schedules.
How a prescription replaces the MOTS-c dosage chart
With a prescription, you do not need to build a MOTS-c dosage chart yourself. At telos rx the process is:
- Online intake. You answer questions about your health, medications and goals.
- Asynchronous provider review. A US-licensed provider reviews your answers, with no scheduled appointment. A prescription is required, and approval is not guaranteed.
- Provider-set dose. If MOTS-c is appropriate, the provider sets the dose and schedule.
- Licensed pharmacy. A licensed US pharmacy compounds MOTS-c as a subcutaneous injection and dispenses it ready to inject at your prescribed dose, so there is nothing to mix and no dose to calculate.
- Ongoing support. You can message the care team, and plans can be cancelled from the portal.
Follow your pharmacy label and your provider's instructions, not a generic chart. For technique, see the upcoming how to inject MOTS-c guide. Details on the prescription route are on the telos rx MOTS-c page.
Two reminders apply whatever the maths says. MOTS-c is not FDA-approved for any use; an FDA advisory committee voted in July 2026 to recommend it for compounding, but that vote is non-binding and pending rulemaking. Since October 28, 2026, a temporary HHS enforcement discretion policy covers single-ingredient MOTS-c injections compounded by state-licensed pharmacies under strict conditions; it is not FDA approval and sets no dose. And for tested athletes, MOTS-c is prohibited at all times under WADA Prohibited List category S4, hormone and metabolic modulators, as an AMPK activator, according to USADA.
Frequently asked questions about the MOTS-c dosage chart
Is there a reliable MOTS-c dosage chart?
Only for unit conversion. A MOTS-c dosage chart can reliably convert mg to mcg and syringe units to volume. No chart can give an evidence-based human dose, because no controlled human trial of injected MOTS-c has established one.
How do I convert mg to mcg?
Multiply by 1,000. For example, 0.5 mg equals 500 mcg and 1 mg equals 1,000 mcg. To go from mcg to mg, divide by 1,000. This is an illustration only, not a dosing recommendation.
How does bac water change a MOTS-c peptide dosage chart?
Bac water sets the concentration. The peptide amount in the vial is fixed, so adding more water makes a weaker solution and adding less makes a stronger one. Any chart that lists syringe units must state the concentration it assumes. This only applies to research powders mixed at home; telos rx MOTS-c arrives ready to inject, so there is nothing to mix.
How many mL is 10 units on a U-100 syringe?
10 units on a U-100 syringe is 0.1 mL, because 100 units equals 1 mL. How much peptide that volume contains depends entirely on the concentration in the vial.
Can a peptide calculator tell me my mots c dosage?
No. A peptide calculator converts a target amount into a volume or number of units. It cannot decide what the target amount should be. For MOTS-c, that decision belongs to a licensed provider.
Why do MOTS-c dosage charts online disagree?
They assume different vial strengths and water volumes, mix mg, mcg and units, and often rely on animal research figures that do not translate to people. None are based on controlled human trials.
Does telos rx use a dosage chart?
No. At telos rx, a US-licensed provider reviews your online intake and, if MOTS-c is appropriate, sets your dose and schedule. A licensed US pharmacy prepares it ready to inject at that dose, so there is nothing to mix or calculate. Approval is not guaranteed.
You now know what a MOTS-c dosage chart can and cannot tell you. If you want a licensed provider to decide whether MOTS-c fits your health history, start a short online intake.
Explore MOTS-c at telos rxThis article is for general education and is not medical advice. All numbers shown are maths examples to explain unit conversion and are not dosing recommendations. MOTS-c is not FDA-approved for any use, and compounded MOTS-c has not been evaluated by the FDA for safety, effectiveness or quality. All prescriptions are subject to medical approval by a licensed provider; approval is not guaranteed. telos rx is an online-first, asynchronous telehealth service, and medications are compounded by a licensed US pharmacy. MOTS-c is prohibited in sport at all times under the WADA Prohibited List.