A Semax 10mg vial holds 10 milligrams, which is 10,000 micrograms, of peptide powder. How much is in each syringe unit depends entirely on how much liquid is added: with 2 mL of bacteriostatic water, every unit on a U-100 syringe holds 50 mcg. This page explains that unit conversion as maths only, to decode grey-market vial labels. It is not a dosing recommendation. telos rx Semax is a ready-made compounded nasal spray, so telos rx patients never reconstitute vials or draw syringe doses.
People who search for Semax 10mg are usually looking at a grey-market vial label, a calculator app or a forum post and trying to make the numbers line up. This guide untangles them step by step, then explains why online peptide calculators can give a confident answer that is still wrong.
Also searched as: semax 10mg vial, semax peptide, semax peptides, and the misspellings senax and semac.
Read this first. Every number and table on this page is a maths example, not a dosing recommendation. Semax is not FDA-approved, there is no established US dose, and nothing here tells you how much to use. If you are a telos rx patient, your Semax is a compounded nasal spray with provider-set dosing, and none of the vial maths below applies to you. Follow your label and your provider's directions.
What a Semax 10mg vial actually contains
Semax 10mg vials are mostly sold on the grey market as "research use only" products. A Semax 10mg vial usually contains freeze-dried (lyophilised) powder, not liquid. The "10mg" describes the total amount of peptide in the vial. It says nothing about how much to take, and it says nothing about concentration until liquid is added.
Two facts make the rest of the maths possible:
- Mass: 10 mg of peptide equals 10,000 mcg.
- Volume: whatever liquid is added spreads that 10,000 mcg evenly through the solution.
So the same Semax 10mg vial can produce a strong solution or a weak one. The powder is fixed; the liquid is the variable. That is the single most important idea on this page.
Maths can tell you what is in a syringe. It cannot tell you what dose is right for you. A US-licensed provider can review your online intake asynchronously and decide whether Semax fits.
See if Semax is right for youMg to mcg: the conversion that causes most errors
One milligram is 1,000 micrograms. To go from mg to mcg, multiply by 1,000. To go from mcg to mg, divide by 1,000. A slip here is a thousandfold error.
Maths example, not a dosing recommendation.
| Milligrams (mg) | Micrograms (mcg) |
|---|---|
| 0.1 mg | 100 mcg |
| 0.25 mg | 250 mcg |
| 0.5 mg | 500 mcg |
| 1 mg | 1,000 mcg |
| 10 mg (a whole Semax 10mg vial) | 10,000 mcg |
Bac water and concentration
Bac water is short for bacteriostatic water: sterile water with a small amount of benzyl alcohol added as a preservative, so a multi-use vial resists bacterial growth after it is opened. It is the liquid most often used to reconstitute peptide powder. Grey-market vial instructions often tell buyers to add a set volume of bac water. Whether any diluent is appropriate depends on the product, and telos rx patients do not need it at all, because their Semax arrives as a ready-made nasal spray.
Concentration is simply mass divided by volume. For a Semax 10mg vial:
Concentration (mcg per mL) = 10,000 mcg ÷ mL of liquid added
Here is how that plays out across different reconstitution volumes. What research-vial buyers have to do by hand, and why it is so easy to get wrong, is described in our peptide reconstitution explainer, so we will not repeat it here. None of it applies to a telos rx prescription, which arrives ready to use.
Maths example, not a dosing recommendation.
| Liquid added to a Semax 10mg vial | Concentration | mcg in 1 unit (0.01 mL) | mcg in 10 units (0.1 mL) |
|---|---|---|---|
| 1 mL | 10 mg/mL (10,000 mcg/mL) | 100 mcg | 1,000 mcg |
| 2 mL | 5 mg/mL (5,000 mcg/mL) | 50 mcg | 500 mcg |
| 2.5 mL | 4 mg/mL (4,000 mcg/mL) | 40 mcg | 400 mcg |
| 3 mL | 3.33 mg/mL (about 3,333 mcg/mL) | about 33.3 mcg | about 333 mcg |
| 4 mL | 2.5 mg/mL (2,500 mcg/mL) | 25 mcg | 250 mcg |
| 5 mL | 2 mg/mL (2,000 mcg/mL) | 20 mcg | 200 mcg |
Notice the pattern. Doubling the liquid halves the amount in every unit. That is why two people with the same Semax 10mg vial can draw "10 units" and get very different amounts of peptide.
For comparison, the Semax nasal solutions described in Russian studies were 0.1% and 1%, which work out to 1 mg/mL and 10 mg/mL. Our Semax dosage guide covers what those studies used and why that is research, not instruction.
Reading a U-100 syringe
Most small syringes used for peptides are U-100 insulin-style syringes. "U-100" means the markings assume 100 units per 1 mL, so:
- 1 unit = 0.01 mL
- 10 units = 0.1 mL
- 100 units = 1 mL
Barrel size (30, 50 or 100 units) changes how finely the syringe is marked, not what a unit means. A U-40 syringe is marked differently, and mixing the two scales is a classic error.
Turning an amount into syringe units
The reverse calculation, from an amount to units, uses one formula:
Units = (amount in mcg ÷ concentration in mcg per mL) × 100
Maths example, not a dosing recommendation. Imagine a grey-market instruction sheet that, purely for the arithmetic, lists 300 mcg, and a Semax 10mg vial mixed with 2 mL of liquid (5,000 mcg/mL). Then 300 ÷ 5,000 = 0.06 mL, and 0.06 × 100 = 6 units. Mixed with 4 mL instead (2,500 mcg/mL), the same 300 mcg would be 0.12 mL, or 12 units. The amount is identical; only the volume moves.
telos rx prescribes Semax as a compounded nasal spray, made ready to use by a licensed US pharmacy, so there is nothing to mix or draw up. Your provider sets the dose and schedule.
Learn about the Semax protocolWhy a peptide calculator can mislead you
A peptide calculator does the division above in a split second. The arithmetic is rarely the problem. The inputs are. Here is where a peptide dosage calculator can quietly go wrong:
- It trusts the label. A calculator assumes the vial really holds 10 mg. Grey-market "research use only" vials have unverified identity, purity and fill amount, so the starting number may be off. Our guide on how to read a peptide COA explains why paperwork alone is not proof.
- Unit slips. Typing mg where the field wants mcg gives a result a thousand times too small or too large, and the app will not know.
- Wrong syringe scale. Most tools assume U-100. A different syringe makes every answer wrong.
- Tiny volumes. Very small unit counts are hard to measure accurately, so rounding errors become a large share of the amount.
- It cannot choose a dose. This is the big one. A peptide calculator converts whatever number you type. It has no way of knowing whether that number is appropriate, safe or supported by evidence. For Semax there is no established US dose at all.
Why the Semax 10mg label is not a dose
Briefly, because our Semax dosage guide covers this in depth: Semax is not FDA-approved, there is no US label, and the human research is mostly small Russian studies. "10mg" is a quantity of powder, chosen for manufacturing convenience. It is not a recommendation. telos rx does not dispense Semax as a vial at all: it prescribes a compounded nasal spray, with the dose and schedule set by your provider. For how a schedule is structured, see our planned guide to the Semax dosing protocol and cycle, and for nasal delivery see Semax nasal spray questions answered.
How telos rx handles Semax 10mg questions
If you get Semax through telos rx, you do not reconstitute a vial, use bac water or draw syringe units. The process is online and asynchronous:
- You complete an online intake about your health history, medications and goals.
- A US-licensed provider reviews it without a scheduled appointment.
- If Semax is appropriate, the provider prescribes it as a compounded nasal spray and sets the dose and schedule. A prescription is required, and approval is not guaranteed.
- A licensed US pharmacy compounds a ready-made nasal spray and labels it with your directions.
- You can message the care team if anything on the label is unclear.
Full details are on the Semax page. Tested athletes should check the current WADA list and their federation before considering any unapproved peptide.
Summary: Semax 10mg maths in one paragraph
A Semax 10mg vial holds 10,000 mcg of powder. Concentration is 10,000 mcg divided by the mL of bac water or other diluent added, and on a U-100 syringe one unit is 0.01 mL. A peptide calculator can do that maths, but it cannot verify the vial or pick a dose. telos rx Semax is a ready-made compounded nasal spray, so its patients skip the vial maths entirely. Semax is not FDA-approved, and any dose is subject to medical approval by a licensed provider, who you can reach through the telos rx Semax page.
Semax 10mg FAQ
How many mcg are in a Semax 10mg vial?
A Semax 10mg vial contains 10,000 mcg in total, because 1 mg equals 1,000 mcg. That figure is the total amount of powder in the vial, not a dose or a recommendation.
How much bac water goes in a Semax 10mg vial?
There is no single correct volume. Adding more bac water makes a weaker solution and less liquid makes a stronger one. telos rx patients do not add bac water at all, because telos rx Semax is a ready-made compounded nasal spray.
How many units is 1 mL on a U-100 syringe?
On a U-100 syringe, 1 mL equals 100 units, so 1 unit is 0.01 mL and 10 units is 0.1 mL. The amount of peptide in each unit depends on the concentration of the solution.
How do I convert mg to mcg?
Multiply milligrams by 1,000 to get micrograms. For example, 0.5 mg is 500 mcg and 10 mg is 10,000 mcg. To convert mcg to mg, divide by 1,000.
Is a peptide dosage calculator accurate?
A peptide dosage calculator does the arithmetic correctly if the inputs are right, but it trusts the vial label, assumes a syringe type and cannot judge whether a dose is appropriate. For Semax there is no established US dose, so a calculator cannot supply one.
Is 10mg a Semax dose?
No. 10mg describes the total peptide in a Semax 10mg vial, not an amount to take. Semax is not FDA-approved and has no established US dose. At telos rx, Semax is a compounded nasal spray and a US-licensed provider sets the dose and schedule.
Does telos rx sell Semax 10mg vials?
No. telos rx prescribes Semax as a compounded nasal spray, not a vial, so patients do not reconstitute powder or draw syringe doses. A US-licensed provider reviews your online intake, sets the dose and schedule if appropriate, and approval is not guaranteed.
Now the Semax 10mg numbers make sense, but the right dose is still a clinical decision. Start a short online intake and let a licensed provider review it.
Explore Semax at telos rxThis article is for general education and is not medical advice. The calculations shown are unit-conversion maths only and are not a dosing recommendation. Semax is not FDA-approved for any use, and compounded Semax has not been evaluated by the FDA for safety, effectiveness or quality. telos rx prescribes Semax as a compounded nasal spray made by a licensed US pharmacy, with the dose and schedule set by your provider. All prescriptions are subject to medical approval by a licensed provider; approval is not guaranteed. telos rx is an online-first, asynchronous telehealth service. Tested athletes should check the current WADA Prohibited List.